Safety specification for the use of liquefied gas cylinders

       The characteristics of liquefied petroleum gas (LPG) with its clean and convenient and widely used, but as a result of liquefied petroleum gas (LPG) has the properties of flammable, explosive, toxic, plus the bottle itself under high pressure, improper use, easy to security accidents. In order to ensure your safety inspection, you must strictly observe its safety regulations when using liquefied gas cylinders.

Safety specification for the use of liquefied gas cylinders:

A qualified product with a manufacturing licence shall be used and no untested gas cylinders shall be used.

The first three inspection periods shall be four years and the fourth shall be three years since the day of manufacture. Gas cylinders that have been used for more than 15 years shall not be inspected and shall be destroyed according to law.

The user must go to the registered unit or the registered unit to purchase the gas. A gas cylinder containing liquefied petroleum gas shall not transport more than 50km.

Before use, the gas cylinder should be checked for safety condition. The gas cylinder must be used according to the instruction manual, and the gas cylinder which does not meet the safety technical requirements is not allowed to be used.

The place of the cylinder should not be near the heat source and the open flame, should ensure the cylinder body is dry.

When the cylinders are in place, measures should be taken to prevent dumping.

Summer should prevent exposure. Knock, impact gas cylinder. It is strictly forbidden to weld arc on cylinder.

Today it is forbidden to use the heat source temperature is higher than 40 ℃ to heating cylinder.

For users and dealers of liquefied petroleum gas, it is strictly forbidden to reverse the gas in the cylinder, or directly from the tanker to the cylinder, and strictly prohibit the treatment of the residual liquid in the cylinder.

After the gas cylinder is put into use, the gas bottle shall not be filled and repaired. Do not change the seal and color mark of the cylinder without permission.

Because is the special container used to store liquefied petroleum gas, liquefied petroleum gas cylinders have its internal liquefied gas when the pressure is very big, slightly improper operation is likely to cause explosion, so must follow it in the usual use of safety standards, is not only in order to prolong the service life of the cylinder, with also is for the sake of our safety.