Article List
- Denmark supports clean shipping with new biogas plantA liquefied biogas (LBG) plant to be built in Denmark will allow ships to bunker clean fuel directly from dock, enabling the shipping industry to reduce emissions and increase refuelling efficiency.Having recently started construction on the new facility, Nordliq plans to begin supplying LBG to bothIndustry knowledge November 08, 2022
- Renewables and electric growth stem CO2 emissionsGlobal carbon dioxide (CO2) emissions from fossil fuel combustion are expected to grow by just under 1% this year, only a small fraction of their increase last year, as a strong expansion of renewables and electric vehicles prevents a much sharper rise, according to the IEA.New analysis of data fromIndustry knowledge October 27, 2022
- Waste-to-hydrogen to play ‘major role’ in circular economy of the futureWith the adoption of decarbonisation, decentralisation, and digitisation – also known as the three D’s – global industry is entering a period of energy transition, where conventional fossil-fuel-based sources are gradually being replaced by sustainable, renewable alternatives, driving forward, and rIndustry knowledge October 08, 2022
- UK CO2 shortage concerns erupt as Billingham halts ammonia productionCF Fertilisers UK – a subsidiary of CF Industries Holdings, Inc – that it will temporarily halt ammonia production at the Billingham Complex due to ‘market conditions.’Despite ceasing production, the company plans to harness the site’s ammonia import capability to continue to run its ammonium nitratIndustry knowledge September 27, 2022
- Liquid oxygenLiquid oxygen (commonly referred to by the abbreviation LOX or LO2) is the form of oxygen in its liquid state. It has important applications in aerospace, submarine and gas industries. Liquid oxygen is a light blue liquid with strong paramagnetic properties.Liquid oxygen has a wide range of industriIndustry knowledge August 25, 2022
- The difference between high-purity argon and ordinary argon processesCurrently, all argon sources are liquid. There are two types of liquid argon: high-purity argon and ordinary argon. Some machines require high-purity argon. For example, spectrometers must use high-purity argon gas. The difference between high-purity argon and regular argon is their purity. PIndustry knowledge August 17, 2022
- Storage of gas cylinders and protection of gas cylinders1. The user shall ensure that the purchased gas cylinders are of reliable quality, with accurate and intact markings, and shall not change the stamp and color marking of the gas cylinders without authorization. During the inspection, according to the type of purchased experimental gas, check whetherIndustry knowledge August 11, 2022
- 60MW hydrogen plant set to boost Brazil’s clean energy futureA 60MW industrial-scale green hydrogen plant will next year (2023) be operational in the Camaçari Industrial Complex, Brazil, with plans to quadruple this capacity already in place.Believed to be a first of its type for the Latin American country, the plant will be comprised of three 20MW standard eInformation and drawings July 28, 2022
- US CO2 market will tightenIt’s looking like a long hot summer ahead for the US carbon dioxide (CO2) market, with some areas in the states witnessing a tightening in supply.The tightening comes amidst an apparent contamination in the raw gas, meaning CO2 firms operating in liquefaction and purification are faced with a contamIndustry knowledge July 21, 2022
- Specification for safe use of oxygen and acetonitrile hosesRegulations: Oxygen and E-juel hoses cannot be tied with iron wires, because they are easy to fall off and cause air leakage, and special hose clamps should be used.Other considerations are as follows: 1. Pay attention to the preservation and maintenance of the hose, avoid sunlight, rain and snowIndustry knowledge July 15, 2022